It is using single circle fabric folding system, which constructed from drive mechanism, fabric and control system. The one part of drive mechanism is dynamical, using tubular motor to carry the tube and tape roller support revolving to make the steel wire on-off. The other part of the drive mechanism is steady flexible runner. The steel wire change directions by runner.To make the two sides of the steel wire fasten on tape roller support at the same time and tighten the steel wire all along. One can add guiding steel wire or track guiding system if the blinds is too wide or too long. This need little tensile force, so there is not any requirement on fabric, the range is widely.

FCS folding skylight shade(steel guiding)

FCS folding skylight shade(track guiding)

Using area: glass roof with tiltable and plane

Function : many control ways. It can stop at anywhere.

Setting  : The width is 0.7-3.5m, The length is<10m. The area is<35sq.m.

Motor   : tubular motor. To choose the correct motor one should consider curtain length and width.

Shape   : Linear/ Trapezium

Control  : Radio remote control (single control/ group control)\ manual control

Instruction : This need little tensile force, so the range of fabric is very wide. One need to add bracket when use one motor control two fabric or one motor control three fabric. One need to add steering drive shaft when the drive axes is folded, the maximum angle is 130centidegree.